Updated Nov-2025 Pass 010-151 Exam - Real Practice Test Questions
Download Free Cisco 010-151 Real Exam Questions
Cisco 010-151 (Supporting Cisco Datacenter Networking Devices or DCTECH) Certification Exam is a professional-level certification that validates the candidate's skills and knowledge in supporting Cisco data center networking devices. Supporting Cisco Datacenter Networking Devices (DCTECH) certification is globally recognized and can help IT professionals advance their careers. Supporting Cisco Datacenter Networking Devices (DCTECH) certification also serves as a prerequisite for other Cisco data center certifications, making it an essential certification for IT professionals who work with Cisco data center networking devices.
NEW QUESTION # 45
Refer to the exhibit.
Which item does A represent?
- A. SuperCap module for Cisco UCS B420 M3 Blade Servers
- B. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
- C. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
- D. mLOM for Cisco UCS B420 M3 Blade Servers
- E. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
Answer: D
NEW QUESTION # 46
Which two statements about Cisco UCS 6454 Fabric Interconnect are true? (Choose two.)
- A. All Ethernet ports can support FCoE.
- B. Provides both the LAN and SAN connectivity for all servers within its domain.
- C. Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only.
- D. 1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports.
- E. It hosts and runs Cisco Integrated Management Controller (CIMC).
Answer: A,B
Explanation:
The Cisco UCS 6454 Fabric Interconnect (FI) is a key component in Cisco's Unified Computing System (UCS), providing both LAN and SAN connectivity, along with advanced features like Fibre Channel over Ethernet (FCoE). Let's examine each option in detail:
Option A - 1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports:
This statement is incorrect. While the Cisco UCS 6454 FI does support a variety of Ethernet speeds (10/25/40/100 Gigabit Ethernet) and FCoE, it actually has 54 ports. Additionally, it is not a 200/400 Gigabit Ethernet switch, as those higher speeds are not supported on this model. Therefore, this statement is not accurate for the UCS 6454.
Option B - It hosts and runs Cisco Integrated Management Controller (CIMC):
This is incorrect. The Cisco UCS 6454 FI does not run the Cisco Integrated Management Controller (CIMC). CIMC is typically used for managing individual servers (such as UCS C-Series standalone servers) and not for Fabric Interconnects, which are managed through UCS Manager (UCSM).
Option C - All Ethernet ports can support FCoE:
Correct. The Cisco UCS 6454 FI supports FCoE on all Ethernet ports, allowing for both LAN and SAN traffic over a unified fabric. This makes it an effective solution for data center environments that want to consolidate storage and network traffic, enhancing flexibility and reducing infrastructure costs.
Option D - Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only:
This statement is incorrect. While the UCS 6454 FI does indeed provide management and connectivity for the UCS 5108 Server Chassis and B-Series Blade Servers, it also supports UCS C-Series Rack Servers when they are integrated into the UCS environment. Therefore, it is not limited to only the B-Series Blade Servers and UCS 5108 Chassis.
Option E - Provides both the LAN and SAN connectivity for all servers within its domain:
Correct. The UCS 6454 FI provides both LAN and SAN connectivity, acting as a unified fabric solution for servers within the UCS domain. This is a primary function of the Fabric Interconnect, making it a crucial component in simplifying connectivity and management in UCS environments by handling both network and storage traffic.
Cisco Datacenter Networking Device Reference:
Cisco UCS 6454 Fabric Interconnect: The UCS 6454 FI supports 10/25/40/100 Gigabit Ethernet and FCoE on all Ethernet ports, providing unified network and storage connectivity for UCS-managed servers.
Cisco UCS Manager (UCSM): Cisco UCSM provides centralized management for all components in a UCS domain, including Fabric Interconnects, B-Series Blade Servers, and C-Series Rack Servers when integrated.
In summary, options C and E are the correct answers. The Cisco UCS 6454 Fabric Interconnect supports FCoE on all Ethernet ports and provides both LAN and SAN connectivity for all servers within its domain, which are essential features for a unified data center fabric.
NEW QUESTION # 47 
Refer to the exhibit. Which item does B represent?
- A. mLOM
- B. PCIe Riser 1
- C. PCIe Riser 2
- D. Power Supply
- E. Rear 2.5-inch drive bays
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. A - Installed Firmware
- B. D - Capability Catalog
- C. E - Management Extension
- D. C - Images
- E. B - Packages
Answer: E
NEW QUESTION # 49
Refer to the exhibit.
Which three options are features of the Cisco UCS 6248UP Fabric Interconnect front panel? (Choose three.)
- A. FCoE port
- B. USB port
- C. Fan module
- D. 10 Gb/s port
- E. Console port
Answer: B,C,E
NEW QUESTION # 50
Which NX-OS command is used to display the boot variable configuration?
- A. show config
- B. open boot
- C. display boot
- D. show boot
Answer: D
Explanation:
Reference:
In Cisco NX-OS, the show boot command is used to display the current boot variable configuration, which includes information about the designated boot image and other boot settings on the device. The boot variable determines which software image the device will load on the next reboot. This is crucial for ensuring that the correct firmware or operating system version is used during startup, especially in data center environments where stability and compatibility are essential.
Details of Command Options for Context:
display boot: This command is not valid in Cisco NX-OS. "display" is not a recognized command syntax in Cisco's command-line interface.
open boot: This is also not a valid command in Cisco NX-OS. There is no such command as "open boot" in the command set.
show config: While show config or similar variations like show running-config or show startup-config are used to display the configuration on Cisco devices, they do not specifically display the boot variables. These commands are used to view the full configuration of the device but do not isolate boot-related information.
show boot: The show boot command is the correct answer as it specifically displays the boot configuration, including boot variables and the path to the system image file designated for startup. This command is commonly used by network engineers to verify or troubleshoot boot configurations in Cisco NX-OS environments.
Cisco Datacenter Networking Device Reference:
Cisco Nexus Switches (NX-OS): Cisco Nexus switches running NX-OS support the show boot command, making it easy for engineers to verify and troubleshoot boot variables in complex data center deployments. For example, on the Cisco Nexus 9000 series, running show boot provides the path to the system boot image.
Cisco UCS (Unified Computing System): Though UCS uses a different configuration model, the UCS Fabric Interconnects, which may run an NX-OS-based operating system, also utilize similar commands for managing boot variables.
In summary, show boot is the correct command for displaying the boot variable configuration in Cisco NX-OS, enabling network administrators to verify the boot settings and ensure that devices are configured to boot with the appropriate software image.
NEW QUESTION # 51
What enables NVM Express host software to communicate with nonvolatile memory?
- A. SATA
- B. PCle
- C. SAS
- D. SCSI
Answer: B
NEW QUESTION # 52
Which three statements about FCoE are true? (Choose three.)
- A. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
- B. Encapsulates Fibre Channel frames into Ethernet frames, which allows them to run alongside traditional IP traffic.
- C. Consolidates I/O traffic in the data center.
- D. Increases capital costs due to the difficulty to manage.
Answer: A,B,C
NEW QUESTION # 53
Which three options are the minimum browser requirements to log into the Cisco CIMC GUI? (Choose three.)
- A. HTTP and HTTPS enabled
- B. Internet Explorer version 10
- C. Adobe Flash Player 10 or higher
- D. Java 1.6 or higher
- E. Adobe Shockwave Player 11 or higher
- F. Firefox 26.0
Answer: A,C,D
NEW QUESTION # 54
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.
Answer:
Explanation:
NEW QUESTION # 55
Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?
- A. Cisco MDS 9709
- B. Cisco MDS 9710
- C. Cisco MDS 9706
- D. Cisco MDS 9718
Answer: D
NEW QUESTION # 56
Refer to the exhibit.
Which item does B represent?
- A. mLOM
- B. PCle Riser 2
- C. PCle Riser 1
- D. Power Supply
- E. Rear 2.5-inch drive bays
Answer: B
NEW QUESTION # 57
What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?
- A. 550 m
- B. 80 km
- C. 10 km
- D. 40 km
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION # 58
Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
- A. D - Kernel running version 4.2(1)N(1.4m)
- B. B - IO Module 1 running version 1.4(1m)
- C. A - UCS Manager running version 1.4(1m)
- D. C - Interface Card 1 running version 1.4(1m)
Answer: C
NEW QUESTION # 59
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
- A. exit
- B. Ctrl-L
- C. quit
- D. end
- E. Ctrl-C
Answer: D
NEW QUESTION # 60
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module status
- B. Module ports type
- C. Module type
- D. Module IP address
- E. Module license information
Answer: A,C
NEW QUESTION # 61
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module status
- B. Module ports type
- C. Module type
- D. Module IP address
- E. Module license information
Answer: A,C
Explanation:
Explanation/Reference: https://www.cisco.com/en/US/docs/switches/datacenter/sw/4_2/nx-os/system_management/ command/reference/sm_cmd_show.html
NEW QUESTION # 62
Which ANSI/TIA-942 data center tier provides up to 99.982% uptime availability per year?
- A. concurrently maintainable site infrastructure
- B. redundant-distribution site infrastructure
- C. redundant-capacity component site infrastructure
- D. basic site infrastructure
Answer: A
NEW QUESTION # 63
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9513
- B. MDS 9509
- C. MDS 9506
- D. MDS 9710
Answer: D
NEW QUESTION # 64
What are two functions of system controllers in the Cisco Nexus 9500 Series? (Choose two.)
- A. They are used to offload the internal non-data-path switching and management functions from the supervisor engines.
- B. The Cisco Nexus 9500 Series supports redundant system controllers.
- C. They control the Layer 2 and Layer 3 services.
- D. The Cisco Nexus 9500 Series switch software, Enhanced NX-OS, runs on the system controllers.
- E. They provide centralized arbitration to the system fabric for all line cards.
Answer: A,B
NEW QUESTION # 65
......
The Supporting Cisco Datacenter Networking Devices (DCTECH) certification exam, also known as the Cisco 010-151 exam, is designed for professionals who are interested in pursuing a career in data center networking. 010-151 exam is part of the Cisco Data Center Networking Sales Specialist certification track and covers a wide range of topics related to data center networking devices.
010-151 Dumps 100 Pass Guarantee With Latest Demo: https://passcollection.actual4labs.com/Cisco/010-151-actual-exam-dumps.html