2026 Latest Network Appliance NS0-593 Real Exam Dumps PDF
NS0-593 Exam Dumps, NS0-593 Practice Test Questions
NEW QUESTION # 23
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- B. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
- C. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- D. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
Answer: D
NEW QUESTION # 24
A customer reports that while Installing Windows updates on their external Vscan servers, clients could not access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)
- A. Disable the -scan-mandatory flag in the Vscan policy.
- B. Update the Vscan servers one at a time.
- C. Modify the CIFS shares to be continuously available (CA) shares.
- D. Enable the -scan-mandatory flag in the Vscan policy.
Answer: A,B
Explanation:
Updating the Vscan servers one at a time can prevent the clients from losing access to the files on the CIFS SVM, as there will always be at least one Vscan server available for scanning. Disabling the -scan-mandatory flag in the Vscan policy can also avoid the issue, as it allows the clients to access the files even if there are no Vscan servers online, but this may compromise the security of the data. Enabling the -scan-mandatory flag or modifying the CIFS shares to be CA shares will not help, as they do not affect the availability of the Vscan servers or the scanning process. Reference = Vscan server installation and configuration, Update the Vscan On-Access policy configuration for an SVM
NEW QUESTION # 25
Your customer complains that u host will constantly report losing a connection to the iSCSl target and then
report that the session was reestablished.
As shown in the exhibit, what is a cause of this flapping?
- A. A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in
different initiator groups. - B. A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.
- C. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are
accessing the same LUN. - D. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the
same IQN.
Answer: C
NEW QUESTION # 26
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. SnapDrive for UNIX
- B. Virtual Storage Console
- C. Inventory Collect Tool
- D. Host Utilities package
Answer: D
Explanation:
= The NetApp sanlun command is a tool that returns information about the LUNs mapped to your host, multipathing, and information necessary to create initiator groups. It is part of the Linux Unified Host Utilities package, which also includes other tools to manage NetApp storage, such as failover policies and physical paths. To run the sanlun command, you must install the Host Utilities package on your Linux host. The other options are not relevant for this scenario, as they are either not required or not compatible with the Linux host. Reference = Install Linux Unified Host Utilities 7.1, SAN Toolkit
NEW QUESTION # 27
You are troubleshooting a CIFS connection issue that is reported by some users. You decide to collect a packet trace.
In this scenario, after you generate the packet trace, where do you find the trace file?
- A. /packet_traces of the node hosting the LIF
- B. /vol0/paclcet_traces of the CIFS SVM
- C. /etc/log/mlog/packet._traces Of all nodes
- D. /etc/log/packet_traces of the node hosting the LIF
Answer: D
Explanation:
According to the NetApp Knowledge Base, packet traces are stored in the /etc/log/packet_traces directory of the node hosting the LIF. This applies to ONTAP 9.10 and above systems. For ONTAP 9.2 to 9.9 systems, the procedure to capture packet traces is similar, but the command syntax is slightly different. For ONTAP pre-9.2 systems, the procedure is different and requires the use of the tcpdump command. Reference = How to capture packet traces on ONTAP 9.10+ systems, How to capture packet traces (tcpdump) on ONTAP 9.2 to 9.9 systems, How to capture packet traces in ONTAP pre-9.2
NEW QUESTION # 28
After a normal power down of both nodes for building maintenance, Node01 of a 2-node cluster cannot be powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?
- A. Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.
- B. Reinitialize the cluster with option 4a from the boot menu.
- C. Perform a takeover with the storage failover takeover -ofnode Node01 -option force command.
- D. Recreate the cluster with the system configuration recovery cluster recreate -from node command.
Answer: C
Explanation:
= The correct action to bring the cluster online and allow Node02 to serve data is to perform a takeover with the storage failover takeover -ofnode Node01 -option force command. This command will force Node02 to take over the resources of Node01 and serve the data from both nodes. This is necessary because Node01 is not responding and cannot initiate a graceful takeover. The other options are not correct because they will either destroy the existing cluster configuration (A and D) or reboot the node without taking over the resources of the other node (B). Reference = 1 Halt or reboot a node without initiating takeover in a two-node cluster - NetApp Documentation 2 Solved: Graceful shut down - NetApp Community
NEW QUESTION # 29
Refer to the exhibit.
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the storage failover giveback command on Site B.
- B. Enter the storage failover giveback command on Site A.
- C. Enter the metrocluster switchback command on Site A.
- D. Enter the metroclustor switchback command on Site B.
Answer: C
Explanation:
The question refers to a MetroCluster configuration, which is a disaster recovery solution that uses two physically separated, mirrored clusters1.
The exhibit shows a MetroCluster switchover scenario, where Site A has experienced a disaster and Site B has taken over the tasks of Site A2.
To return the MetroCluster to a normal state, you need to perform a MetroCluster switchback operation, which reverses the switchover and activates the original sync-source storage virtual machines (SVMs) on Site A3.
To perform a MetroCluster switchback, you need to enter the metrocluster switchback command on the cluster that was the source of the switchover, which is Site A in this case3.
The other options are not correct, because:
A) Entering the metrocluster switchback command on Site B will not work, as Site B is the destination of the switchover, not the source3.
C) Entering the storage failover giveback command on Site B will not work, as this command is used for local HA failover within a cluster, not for MetroCluster switchover between clusters4.
D) Entering the storage failover giveback command on Site A will not work, as this command is used for local HA failover within a cluster, not for MetroCluster switchover between clusters4. Reference:
Understanding MetroCluster data protection and disaster recovery - NetApp Perform IP MetroCluster switchover and switchback - NetApp Performing a switchback - NetApp High-availability configuration - NetApp
NEW QUESTION # 30
Your customer wants to access a LUN on a FAS 8300 system from a VMware ESXi server through the FC
protocol. They already created a new SVM, volume. LUN, and igroup for this purpose. The customer reports
that the server's FC HBA port Is online, but the LUN does not show up.
Referring to the exhibit, what is the reason for this problem?
- A. The LUN Is not mapped to the correct SCSI ID.
- B. The zoning on the FC switches Is Incorrect.
- C. The esxserver igroup contains incorrect IQNs.
- D. The FC service has not been configured on the SVM.
Answer: A
NEW QUESTION # 31
You Just used the CLI to create a NetApp ONTAP FlexGroup Volume on a NetApp Cloud Volumes ONTAP
instance. After creation, you notice odd behavior in NetApp Cloud Manager.
In this scenario,what Is the reason for this behavior?
- A. Cloud Volumes ONTAP does not support FlexGroup volumes.
- B. The Capacity Management Mode within Cloud Manager should be set to Manual.
- C. Cloud Manager must be used to provision the FlexGroup volume.
- D. The Capacity Management Mode within Cloud Manager should be set to Automatic.
Answer: C
NEW QUESTION # 32
After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is accessed indirectly. The system node run -node -command netstat command shows retransmits and packet drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP 9.8 software.
In this scenario, what is causing this problem?
- A. AFF A300 and AFF A700 node mixing Is not supported in ONTAP 9.8 software.
- B. The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.
- C. The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.
- D. There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supported version.
Answer: C
Explanation:
A speed mismatch occurs when the cluster ports on different nodes have different speeds, such as 10 Gbps and 40 Gbps1.
A speed mismatch can cause packet loss, retransmits, and latency on the cluster network, especially when data is accessed indirectly, meaning that the node serving the data is different from the node hosting the LIF2.
In this scenario, the AFF A300 nodes have 10 Gbps cluster ports, while the AFF A700 nodes have 40 Gbps cluster ports, creating a speed mismatch on the cluster interconnect34.
The Cisco Nexus 3132Q cluster interconnect switches support both 10 Gbps and 40 Gbps cluster ports, but they have a shallow buffer size of 9 MB per port, which can be easily overwhelmed by the bursty traffic generated by the speed mismatch.
To solve this problem, you need to either upgrade the cluster ports on the AFF A300 nodes to 40 Gbps, or downgrade the cluster ports on the AFF A700 nodes to 10 Gbps, to achieve a homogeneous cluster interconnect1.
Alternatively, you can use QoS policies to limit the bandwidth of the cluster ports to avoid oversubscription and congestion on the cluster interconnect. Reference:
1: Cluster network cabling, ONTAP 9 Documentation Center
2: Cluster Network Latency - Troubleshooting Guide, NetApp Knowledge Base
3: AFF A300 Tech Specs, NetApp
4: AFF A700 Tech Specs, NetApp
[5]: Why do network speed mismatches create problems with shallow buffered switches?, NetApp Knowledge Base
[6]: How to use QoS to limit the bandwidth of cluster ports, NetApp Knowledge Base
NEW QUESTION # 33
When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type consistency points (CPs) found occurring on the loot aggregate.
In this scenario, how will performance of the client operations on the data aggregates be affected?
- A. During B2B processing, clients will be unable to write data.
- B. During B2B processing, clients will be unable to read data.
- C. Data aggregates will not be affected by B2B processing on another aggregate.
- D. During B2B processing, all I/O to the node is stopped.
Answer: C
Explanation:
A B2B type consistency point (CP) occurs when a new CP is triggered before the previous CP is completed, due to the second memory buffer reaching a watermark. This can cause write latency to increase as user write operations are not replied until a write buffer frees up. However, this only affects the aggregate that is undergoing the B2B processing, and not the other aggregates on the same node. Therefore, the performance of the client operations on the data aggregates will not be affected by B2B processing on the root aggregate. Reference = What is the Back-to-Back (B2B) Consistency Point Scenario?, What are the different Consistency Point types and how are they measured in ONTAP 9?, What are the different Consistency Point types and how are they measured?
NEW QUESTION # 34
You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail over across subnets.
How would you accomplish this task?
- A. Configure VIP LIFs using OSPF.
- B. Configure an equal number of UFs on each subnet.
- C. Configure VIP LIFs using BGP.
- D. Configure a I IF failover policy for each subnet inside a single broadcast domain.
Answer: C
Explanation:
A LIF (Logical Interface) is a logical entity that represents a network connection point on a node1.
A VIP LIF (Virtual IP LIF) is a LIF that can fail over across subnets within an IPspace2.
BGP (Border Gateway Protocol) is a routing protocol that enables VIP LIFs to advertise their IP addresses to external routers and to update the routing tables when a failover occurs3.
To connect a NetApp ONTAP cluster to a complex network that requires LIFs to fail over across subnets, you need to configure VIP LIFs using BGP on the cluster and on the external routers3.
This way, you can ensure that the network traffic is routed to the optimal node and port for each VIP LIF, and that the network connectivity is maintained in the event of a node or port failure3. Reference:
1: Logical Interfaces, ONTAP 9 Documentation Center
2: VIP LIFs, ONTAP 9 Documentation Center
3: Configuring BGP on a cluster, ONTAP 9 Documentation Center
NEW QUESTION # 35
You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF A400 NetApp ONTAP 9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from each VM on the shared FC LUN-backed datastores for troubleshooting purposes.
In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?
- A. vSphere Cluster Services (vCLS)
- B. Network I/O Control (NIOC)
- C. Storage I/O Control (SIOC)
- D. Virtual machine ID (VMID)
Answer: D
Explanation:
The VMware feature that is supported by ONTAP software to identify and follow I/Os from each VM on the shared FC LUN-backed datastores is Virtual machine ID (VMID). VMID is a unique identifier assigned to each VM by the vCenter Server. ONTAP software can use VMID to map the VMs to the FC LUNs and provide visibility into the I/O performance and latency of each VM. This feature is also known as Virtual Storage Console (VSC) for VMware vSphere12. Reference: 1: Virtual Storage Console for VMware vSphere | NetApp Documentation 2: How to use Virtual Storage Console (VSC) to monitor the performance of virtual machines - NetApp Knowledge Base
NEW QUESTION # 36
The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02.
Node-02 panics showing the string below.
PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess
fnmbx_instanceWorker on release 9.5P8 (C)
What has happened in this situation?
- A. While in maintenance mode, the sldiag device show command was executed.
- B. While in maintenance mode, the mailbox destroy local command was executed.
- C. While in maintenance mode, the fcadmin device_map command was executed.
- D. While in maintenance mode, the HA_config show command was executed.
Answer: C
NEW QUESTION # 37
A customer enabled NFSv4.0 on an SVM and changed the client mount from NFSv3 to NFSv4. Afterwards, the customer found that the directory owner was changed from root to nobody.
In this scenario, which statement is true?
- A. The clients must be restarted to start using NFSv4.
- B. The export policy is not configured properly.
- C. The customer did not configure name services on the SVM.
- D. The ID mapping domains do not match between the client and server.
Answer: D
Explanation:
NFSv4 is a network file system protocol that supports security, performance, and scalability features. NFSv4 uses ID mapping to ensure that the permissions of files and directories are consistent across different NFSv4 servers and clients1 ID mapping is the process of translating the user and group identifiers (UIDs and GIDs) of the local system to the user and group names (user@domain and group@domain) of the remote system, and vice versa. ID mapping is done by the idmapd service, which uses the /etc/idmapd.conf file to determine the domain name of the system2 ID mapping requires that the NFSv4 server and client have the same domain name configured in the /etc/idmapd.conf file. If the domain names do not match, the idmapd service cannot map the UIDs and GIDs to the user and group names, and the permissions of the files and directories will be shown as nobody:nobody, which is the default anonymous user3 Therefore, if a customer enabled NFSv4.0 on an SVM and changed the client mount from NFSv3 to NFSv4, and found that the directory owner was changed from root to nobody, the most likely cause is that the ID mapping domains do not match between the client and server. The customer should check and correct the /etc/idmapd.conf file on both systems, and restart the idmapd service and remount the NFSv4 share4 Reference:
1: ONTAP 9 - Network File System (NFS) - The Open Group 2: ONTAP 9 - NFSv4 and NFSv4.1 Enhancements - The Open Group 3: NFSv4 mount incorrectly shows all files with ownership as nobody:nobody - Red Hat Customer Portal 4: NFSv4 mountpoint shows incorrect ownerships as nobody:nobody in CentOS/RHEL - The Geek Diary
NEW QUESTION # 38
......
Network Appliance NS0-593 (NetApp Certified Support Engineer ONTAP Specialist) Certification Exam is an important certification for IT professionals who work with NetApp storage systems. NetApp Certified Support Engineer ONTAP Specialist certification validates an individual's expertise in NetApp ONTAP and demonstrates their ability to support and troubleshoot these systems. Candidates who pass the exam can differentiate themselves in the job market and open up new opportunities for career advancement.
PDF (New 2026) Actual Network Appliance NS0-593 Exam Questions: https://passcollection.actual4labs.com/NetworkAppliance/NS0-593-actual-exam-dumps.html